2.3 Vegetable oil pan spray

EU food category, from Regulation (EC) No 1333/2008, Annex II, Part D.

Under Annex II, an additive may be used only in the foods and under the conditions listed for them. This page shows what is listed for this category. It does not infer anything from broader categories: where Annex II extends a broader category's provisions to its subcategories, it says so in that category's own listing. See the broader category 2.

Listed for this category

AdditiveMaximum levelConditionsCitation
Butane E943aquantum satis

only vegetable oil pan spray (for professional use only) and water-based emulsion spray.

Regulation (EC) No 1333/2008, Annex II, as amended by (EU) No 1129/2011
Extracts of rosemary E39250 mg/kg

only fats and oils for the professional manufacture of heat-treated foods. Note 41: Expressed on fat basis.

Regulation (EC) No 1333/2008, Annex II, as amended by (EU) No 1129/2011
Isobutane E943bquantum satis

only vegetable oil pan spray (for professional use only) and water-based emulsion spray.

Regulation (EC) No 1333/2008, Annex II, as amended by (EU) No 1129/2011
Propane E944quantum satis

only vegetable oil pan spray (for professional use only) and water-based emulsion spray.

Regulation (EC) No 1333/2008, Annex II

Permitted as members of an additive group

Annex II authorises some additives collectively. Each group below shares one set of conditions for this category.

Group I, Additives — 162 additivesML = quantum satis; except E 425 ML = 10000 mg/kg; E 620 to E 625, ML = 10000 mg/kg individually or in combination, expressed as glutamic acid; E 626 to E 635, ML = 500 mg/kg individually or in combination, expressed as guanylic acid.
Phosphoric acid - phosphates - di - tri- and polyphosphates — 26 additivesML = 30000 mg/l. only water-based emulsion sprays for coating baking tins. Note 1: The additives may be added individually or in combination.
Silicon dioxide - silicates — 4 additivesML = 30000 mg/kg. only tin greasing products Period of application: from 1 February 2014. Note 1: The additives may be added individually or in combination.